Connecting The Unit To A Pc - Sharp WA-MP50H Operation Manual

Connecting the unit to a PC

WA-MP50H
Connect the unit to a PC to transfer audio data.
MIC
POWER
NAVI
Slide
OPEN
PC
To the USB port
11
WA-MP50H TINSEA075SJZZ
1
Slide the USB port lever until it stops to open the
USB port.
2
Connect the unit to a PC with
the USB cable.
Whilst the unit is connected to the
PC, the message shown on the
right appears on the unit.
Caution:
" Do not disconnect the USB cable whilst transferring
audio data from a PC. Audio data on the unit may
USB
become corrupted.
" Operation is not guaranteed if the PC is connected to
two or more USB devices.
" Connect the USB cable to the PC's USB port. If con-
nected via a USB hub, operation cannot be guaran-
teed.
" We do not guarantee operation of the unit with self-
built PCs or PCs with modified motherboards.
" Make sure to use the supplied USB cable. Use of
other cables (two-way cables, extension cables, etc.)
degrades the quality of connection and may cause a
USB cable
malfunction.
Note:
The buttons on the unit do not work if it is connected to a
PC. Disconnect the PC to operate on the unit (see page
19).
FS
READY
05/8/4 WA-MP50H_SCA.fm