Honda 2010 Insight Owner's Manual page 365

Headlight Aiming
The headlights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area, readjustment may be
required. Adjustments should be
done by your dealer or another
qualified technician.
Replacing a Headlight Bulb
Your vehicle has halogen headlight
bulbs. When replacing a bulb, handle
it by its base, and protect the glass
from contact with your skin or hard
objects. If you touch the glass, clean
it with denatured alcohol and a clean
cloth.
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
High Beam Headlight
HOLDING CLIP
1. Open the hood.
To change the bulb on the right
side, remove the upper part of the
windshield washer reservoir tank.
Use a flat-tipped screwdriver to
remove the holding clip, then
remove the upper part by pulling it
straight up.
CONNECTOR
2. Remove the electrical connector
from the cover by pushing on the
tab to unlock it, then slide the
connector off the cover.
3. Remove the cover on the back of
the headlight assembly by turning
it counterclockwise.
CONTINUED
Lights
359