Ignition Switch - Honda 2010 Insight Owner's Manual

Ignition Switch

The ignition switch has four
positions: LOCK (0), ACCESSORY
(I), ON (II), and START (III).
128
LOCK (0) You can insert or
remove the key only in this position.
To turn the key, push it in slightly. If
your vehicle has an automatic
transmission, the shift lever must
also be in Park.
If the front wheels are turned, the
anti-theft lock may make it difficult
to turn the key. Firmly turn the
steering wheel to the left or right as
you turn the key.
ACCESSORY (I) You can
operate the audio system and the
accessory power sockets in this
position.
If you leave the key in the ignition
switch in the ACCESSORY (I)
position and open the driver's door,
you will see a ''RETURN IGNITION
SWITCH TO LOCK (0) POSITION''
message on the multi-information
display and hear a reminder beeper.
If you turn the ignition key to the
ACCESSORY (I) position with the
driver's door closed, you will see an
''ACCESSORY (I) POSITION''
message on the multi-information
display to inform you of the key
position.