Fisher-Price LIL KAWASAKI 76937 Owner's Manual & Assembly Instructions page 10

5
Button End
• Insert the connector end of the handlebar wire harness
into the rectangular opening in the handlebar.
• Feed the handlebar wire harness through the handlebar.
• Push firmly on the button end of the handlebar wire
harness to snap into the rectangular opening.
6
Guides
Bottom View
• Turn the handlebar upside down.
• Align the handlebar wire harness with the guides on the
underside of the handlebar.
• Push firmly on the handlebar wire harness near each of
the guides to secure the wire in the underside of the
handlebar.
7
Handgrip
• Position the handlebar upright.
• Fit a handgrip onto one end of the handlebar.
Helpful Hint: If the handgrip is difficult to slide onto the
handlebar, moisten the handgrip with warm water before
fitting it onto the handlebar.
• Repeat this procedure to fit the other handgrip onto
the handlebar.
Assembly
Connector
End
Handlebar
Handlebar
Wire Harness
Handlebar
8
• Apply labels #7 and #8 to the handlebar, as shown.
9
• Wipe the steering column with a paper towel to remove
any dirt or oils.
• Fit the steering column bushing onto the straight end of
the steering column.
10
Steering
Column
Rectangular
Opening
• Insert the curved end of the steering column through the
rectangular opening in the vehicle body.
• Rotate the steering column bushing
the rectangular opening in the vehicle body.
10
7
8
RPM x 100 RPM x 100
E F E F
FUEL FUEL
Steering
Column
Steering Column
Bushing
Steering Column
Bushing
Vehicle Body
1 / turn and fit it into
4