Tv And Remote Control - Philips 42PFL6805 User Manual

6.2 TV and remote control

The TV does not switch on
• Switch the TV off and on again with the switch on the bottom
of the TV.
• Check the power cable connection.
The TV does not respond to the remote control
• The remote control might run low on power. To charge the
remote control, use the charger cable supplied to connect the
remote control to a USB connection on a device that is switched
on. A green LED indicates the battery is fully charged.
• During start-up, which can take up to two minutes with
connected devices, the TV and some external devices do not
immediately respond to commands from the remote control. The
device is functioning normally and is not broken.
The TV switches off and the red light blinks
• Switch the TV off and on again with the switch at the bottom
of the TV. Check if there is enough space for ventilation. Wait
until the TV has cooled down.
If the TV does not restart from standby and the blinking occurs
again, call Consumer Care.
You forgot your code to unlock Child lock?
Read Help > More on ... > Locks and timers > Child lock.
Troubleshooting / TV and remote control 61