WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should not
handle parts, including the battery, or help in
assembly of the vehicle.
1
• Fit the dash onto the top of the vehicle.
• Insert a #8 x 1" screw through the hole in each end of the dash.
Tighten the screws.
Steering
Wheel Top
2
• Fit the top and bottom of the steering wheel together. Make sure
both the holes and the spokes in the steering parts are aligned.
• Insert four #6 x
/
" screws into the holes into the bottom of the
1
2
steering wheel and tighten.
Dash
Steering
Column
Vehicle
• Position the vehicle on its side.
• Remove the cap on the end of the steering column. Dispose of
• Fit the straight end of the steering column up through the
FRONT VIEW
• Insert the end of the steering column through the hole in the
Steering Wheel
Bottom
• Turn the vehicle upright.
• Fit the steering wheel onto the steering column.
• Fit a
8
Guide
Guide
3
the cap in the trash.
square opening in the vehicle and out through the large round
hole in the dash. Make sure the steering column is positioned
between the guides on the underside of the vehicle.
steering linkage, as shown.
Steering Wheel
Lock Nut
Steering Column
4
3
lock nut onto the end of the steering column.
/
"
8
Tighten with the assembly tool.
Steering
Column
Steering
Linkage
Square
Opening
BOTTOM VIEW
INSIDE VIEW
T1961pr-0920