Honda 2008 S2000 Owner's Manual page 112

Playing the AM/FM Radio
AUTO SELECT If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Press the A. SEL button. ''A. SEL''
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM and twelve FM stations in
the preset buttons.
You will see a ''0'' displayed after
pressing a preset button if auto
select cannot find a strong station for
that preset button.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described.
106
To turn off auto select , press the
A. SEL (auto select) button. This
restores the presets you originally
set.
Adjusting the Sound
Press the SOUND/MODE (TUNE)
knob repeatedly to display the bass
(BAS), treble (TRE), fader (FAD),
and balance (BAL) setting.
Adjusts the balance, or side-
BAL
to-side strength of the sound.
FAD Adjusts the fader, or the
front-to-back strength of the sound.
TRE Adjusts the treble in the
sound.
BAS Adjusts the bass in the
sound.
Turn the knob to adjust the setting.
When the level reaches the center,
you will see a ''C'' in the display. The
system will return to the audio
display in about 5 seconds.
Audio System Lighting
You can use the instrument panel
brightness control buttons to adjust
the illumination of the audio system
(see page 60 ). The audio system
illuminates when the parking lights
are on, even if the radio is off.