Honda 2008 S2000 Owner's Manual page 107

Airflow Controls
Fan Control Lever
Push this lever up and down to
increase or decrease the fan speed
and airflow. The indicators next to
the lever show you the speed and
airflow selected.
Temperature Control Dial
Turning this dial clockwise increases
the temperature of the airflow.
Recirculation Button
When the recirculation indicator is
on, air from the vehicle's interior is
sent through the system again
(recirculation mode). When the
indicator is off, air is brought in from
the outside of the vehicle (fresh air
mode).
The outside air intakes for the
heating system are at the base of the
windshield. Keep this area clear of
leaves and other debris.
The system should be left in fresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, can cause the windows to fog
up.
Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.
Vents and Heating
Rear Window Defogger Button
This button turns the rear window
defogger off and on (see page
Do not push the defogger button
when the removable hardtop is
removed.
Mode Control Dial
Use the mode control dial to select
the vents the air flows from. Some
air will flow from the dashboard
vents in all modes.
Air flows from the vents on
both sides of the instrument panel,
and from the dashboard vent in front
of the passenger.
Airflow is divided between
the vents in the dashboard and the
floor vents.
CONTINUED
61 ).
101