Replace The Batteries; Power Everything On - Logitech K700 Setup Manual

Logitech® Keyboard Controller
2

Power everything on

Your new Keyboard Controller cannot control your devices until you complete
the on-screen setup.
1. To begin, turn on all devices using your current method of control.
2. Slide the power switch on the Keyboard Controller to ON.
3. Follow the instructions on the TV screen to complete setup.
TV
Companion Box
AVR
INFO MSGS A/B REMOTE CHANNEL
MENU
VID IN AUDIO IN
L R
POWER
STB
*
8

Replace the batteries

OFF ON
Logitech® Keyboard Controller
1. Turn off the Keyboard Controller.
2. Open the battery compartment door by pressing down
on the arrow and sliding the door right.
3. Insert two new AA batteries, as shown in the drawing.
Note the orientation of the replacement batteries.
4. Turn on the Keyboard Controller. The power LED above
the Touchpad should light green.
9