Table of Contents
Advertisement
Available languages
Available languages
16
Connecting the transmitters
You can connect up to four SR 300 IEM G2 transmitters to the
combiner. The combiner incorporates DC distribution for
powering the transmitters.
Pass the cables coming from the combiner's DC outputs
through the cable grips
Insert the hollow jack plugs into the sockets
transmitters.
Connecting the antenna
The combiner combines the transmission signals of up to four
transmitters onto a single antenna.
Connect the BNC cables of the combiner to the BNC
sockets
of the transmitters.
Connect the telescopic antenna of one of the transmitters
to the BNC socket
Pull the end cap to extend the telescopic antenna and align
it upwards.
When rack-mounting the combiner, the telescopic antenna
can be connected to the front of the GA 2 rack adapter by
using the AM 2 antenna mount (optional accessory).
Use a remote antenna (optional accessory) when the combi-
ner position is not the best antenna position for optimum
transmission.
at the rear of the transmitters.
of the combiner.
of the
Advertisement
Table of Contents
