Flowchart: Creating An Fma Configuration File - LG FMA-LG101 Installation & Configuration Manual

Flowchart: Creating an FMA Configuration File

This flowchart provides a visual overview of the steps to create an FMA Configuration (.fma) file. Refer to the
Free-To-Guest (FTG) Device Configuration Application User Guide for further procedural information.
A Configuration Utility,
Configuration file.
B
Configuration file.
C
D
Configuration Utility.
* Up to 141 logical channels can be defined in the channel lineup to be broadcast by the FMA-LG101.
** (Optional) Repeat this step to add FTG Installer Menu settings for additional models.
20
Launch FTG Device
Configuration
Application
(v5.0.0 or higher).
Note: Existing FMA or FTG
Configuration files should
be appropriate to the site
for which you are creating
the new FMA Configuration
file. Otherwise, build the
new file from scratch.
Access FMA (Optional) Copy FTG
Channel Map to
and open FMA current settings and
edit as necessary.
Access the FMA
Open FTG
Configuration Utility.
Create FTG
Access the FMA
Channel Map. *
Configuration Utility.
If necessary,
Copy current FTG
switch to FMA
Channel Map to
FMA Configuration List.
Existing FMA
Yes
Configuration (.fma) Go to
file available for basis Chart A
of new .fma file?
No
Existing FTG
Yes
Go to
Configuration (.rml)
Chart B
file(s) available?
No
Go to
Chart C
FMA
Configuration file
Yes
contains Installer Menu
profile(s) for desired
model(s)?
No
Load default FTG
Installer Menu settings
for selected model(s).
FTG
Configuration file
Yes
contains FTG Channel
Map and FTG Installer
Menu settings?
No
As applicable, create
an FTG Channel Map,
load default FTG
Installer Menu settings
for selected model(s). *
Load default FTG
Installer Menu settings
for selected model(s).
Copy current FTG Installer
Menu settings to FMA
Configuration List. **
(Optional) Load default
FTG Installer Menu settings
Go to
for additional model(s),
Chart D
and/or edit Installer Menu
settings.
(Optional) Edit
Installer Menu settings
to desired values.
(Optional) Edit FTG
Channel Map and/or FTG
Go to
Installer Menu settings
Chart D
and/or load default FTG
Installer Menu settings for
selected model(s).
(Optional) Edit
Installer Menu settings
to desired values.
(Optional) Edit
Go to
Installer Menu settings
Chart D
to desired values.
Save the FMA
Configuration List to
(.fma) file for later use.
206-4124