Advertisement
TECHNICAL GUIDE
II.
VALUE CHECKING AND ADJUSTMENT
Resetting the stopwatch hands to "0" position
Repeat "START" – "STOP" – "RESET" of the stopwatch several times to check if each of the three
stopwatch hands returns to "0" position securely.
Checking the time period of date change
Specified time period of date change: 0:00 a.m. ~ 0:03 a.m.
With the crown at the second click, advance the hour and minute hands until the date changes. Check if
the date changes within the time period specified above.
Remarks on measuring time accuracy
To measure the time accuracy, be sure to reset the stopwatch to "00". If the accuracy measurement is made
while the stopwatch is counting, stable measurements may not be obtained.
Current consumption
Current consumption measurement of Cal. 9T82A requires special tools, and the movement could be
damaged during the procedure of current consumption measurement. We do not recommend, therefore,
that you measure the current consumption for checking. It can be assumed that the current consumption
is within the standard range as long as the movement is kept under proper conditions.
8
* Printed on recycled paper.
Cal. 9T82A
2001-2
Printed in Japan
Advertisement
