LG 32WL30MS Owner's Manual page 70

70
CONTROLLING THE MULTIPLE PRODUCT
36. Fail Over Select (Command: m i)
To set the Fail Over function.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
37. Fail Over Input Select (Command: m j)
To select fail over mode.
*Only available in Fail Over manual mode.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[ ][Data4][Cr]
Data 1 to 4(Priority 1 to 4)
60: RGB
70: DVI-D*
90: HDMI**
* Use 0x70 as data for DVI-D input, regardless DVI-
D(PC) or DVI-D(DTV).
** Use 0x90 as data for HDMI input, regardless
HDMI-DTV or HDMI-PC
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4]
[x]
Data 1 to 4(Priority 1 to 4)
60: RGB
70: DVI-D***
90: HDMI****
*** Returns 0x70 as Data for DVI-D port, regardless
DVI-D(PC) or DVI-D(DTV).
**** Returns 0x90 as Data for HDMI port, regardless
HDMI-DTV or HDMI-PC.
38. Reset (Command: f k)
To execute the Picture, Screen, Audio and Factory
reset function.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data 00: Picture Reset
01: S creen Reset (Only available for RGB
input.)
02: Factory Reset
03: Audio Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
39. Tile Mode (Command: d d)
To select a Tile Mode Off/ On and Tile Row/ Column
size.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: 1st byte - Tile Column value
2 nd byte - Tile Row value
*00, 01, 10, 11 means Tile Mode Off.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
40. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data FF: Check Tile Mode status
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data1 00: Tile Mode Off
01: Tile Mode On
Data2 00 to 0F: Tile Colume Value
Data3 00 to 0F: Tile Row Value