Laney LX120H User Manual page 8

Laney
25
Power inlet socket. Connect to your power source. Make sure the specified voltage is correct for your country!
21
This drawer contains the main safety fuse for the unit.
22
USE ONLY THE CORRECT SIZE AND RATING OF FUSE AS SPECIFIED ON THE PANEL
The mains fuse ratings are detailed in the specs section at the rear of this manual
23
Displays the model number, power requirements and serial number of the unit.
Connect your loudspeaker cabinets here. The impedance of the cabinet/s must not be less than 4 Ohms. Connecting cabinets
24
that have a lower impedance than 4 Ohms will result in the amplifier overheating. Continual use in this manner may cause
permanent damage.
25 Line level FX Loop to connect to an external effects controller.
OPERATING INSTRUCTIONS
24 23
21 22
Page 8 /12