Laney LX120H User Manual page 7

Laney
Controls the amount of mid present on the drive channel.
12
Controls the amount of treble present on the drive channel.
13
Controls the amount of signal returned from the onboard effects processor.
14
The onboard digital effects have been custom designed by Laney to complement the LX120H with a choice of Delays,
15
Flange, Rotary, Octave Down, Chorus, Reverb and combinations of these. Select your chosen effect here, and control the
level with
14
Fancy playing along with a backing track? Connect your CD/MP3 player here.
16
Connect a Laney FS2 footswitch here to enable remote switching for the channel and reverb/FX. Note: Drive channel
17
must be enabled (via ) for channel switching with a footswitch to function.
Line out socket to connect to a recording device or another amplifier/PA etc.
18
When 'on' Indicates that power is connected to the unit and it is ready to go.
19
(Always switch off and disconnect the power cord when not in use)
Main power switch for the unit.
20
6
OPERATING INSTRUCTIONS
Page 7 /12