Specifications - Laney LH50 Operating Instructions Manual

SPECIFICATIONS

Supply Voltage
Mains Fuse
HT Fuse
Power Consumption
Output Power Rating
Loudspeaker outputs
Features
Footswitchable
Reverb
EQ
Input Impedance
Size (H*W*D)
Unit Weight
This product conforms to the requirements of the following European Regulations, Directives & Rules:-
In order to reduce environmental damage, at the end of its useful life, this product must not be disposed of along with normal
household waste to landfill sites. It must be taken to an approved recycling centre according to the recommendations of the
~100V, ~120V, ~230V, ~240V 50/60Hz Factory Option
(~220V>240V = T2A L 250V) (~100>120V = T5A L 250V)
T500mA L
100W
50W
Extension speaker sockets
Pure Class A/B Valve tone
2 x EL34B-STR Power Tubes
4 x 12AX7/ECC83 Preamp tubes
Hi & Lo Gain Inputs
FX Loop with Switchable Level & By-pass
Channel and Reverb
Digital Reverb
Passive Bass, Middle and Treble
Bright Switch
Modern Switch
1MOhm/47pF
246*556*262 (Base)
14Kg
CE Mark (93/68/EEC), Low Voltage (72/23/EEC), EMC (2004/108/EEC),
RoHS (EU2002/95/EC), WEEE (EU2002/96/EC)
WEEE (Waste Electrical and Electronic Equipment) directive applicable in your country.
4, 8 & 16 Ohm (Use one at a time)
(Matched Set)
(FS2 Optional)
(Separate EQ for Clean and Drive)