Samsung SGH-T589 User Manual page 150

Scanning for Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
Press
1.

Wireless and networks
Scan devices.
Your phone begins scanning and lists any discovered
devices in the Bluetooth devices section.
Tap a device name to pair with the device.
2.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
Enter a PIN to pair with the device, if one is required, and
3.
tap OK.
Tethering
This option allows you to share your phone's mobile data
connection via a direct USB connection between your phone and
computer. The Mobile AP feature provides a wireless version of
this same functionality.
Note: You can not mount your phone's microSD card to your computer while
using the USB tethering feature.
142
and then tap (Settings)
Bluetooth settings
 
Note: If additional software or USB drivers are required, navigate to:
http://www.samsung.ca
Plug in the USB cable between your computer and your
1.

phone.
When prompted for a USB mode, press
2.
menu.
Press
3.
Wireless and networks
USB tethering. This places a green check mark next to the
entry and activates the feature. A Tethering or Hotspot
active notification briefly appears on the screen.
Look for the Tethering active icon
area of the screen.
To disconnect tethering:
Press
1.
Wireless and networks
Tap USB tethering from the Tethering menu to remove the
2.
check mark and deactivate the feature.
Remove the USB cable from the phone.
3.
.
and then tap

Tethering and portable hotspot

and then tap

Tethering and portable hotspot.

to exit the
(Settings)


in the Status bar
(Settings)
