Page 1
Action Sounds Action Sounds Action Sounds Action Sounds B A S K E T B A L L Model K9125 Model K9125 Model K9125 www.fisher-price.com www.fisher-price.com www.fisher-price.com...
Page 3
Parts Parts Hint: Some parts were placed inside the lower post for shipping. Upper Post Backboard Collar Sound Box Paddle Lower Post Ball Plug Base #6 x " (1.9 cm) Screw - 4 #8 x 2 " (5.7 cm) Screw - 1 BOTH SHOWN ACTUAL SIZE Note: Tighten and loosen all screws with a Phillips screwdriver.
Page 4
Proper label application will help to keep the label looking its best! • Make sure the area where the label will be applied is clean and dry. Wipe the backboard with a clean, soft, dry cloth to remove any dust or oils. •...
Page 5
Wall Backboard Groove • Lean the rim against a wall for support. • Locate the pegs on each side of the rim and the grooves on the backboard. • Position the backboard with the label side facing up. • Place your foot on the base to hold it steady and slide the backboard onto the upper post at an angle, as far as it will go.
Page 6
Base IMPORTANT! Assembly of the lower post to the base is a permanent assembly. • Align the rib on the bottom of the lower post with the groove in the opening in the base. Hint: For easier assembly, apply a small amount of liquid soap around the bottom of the post.
Page 7
Adjusting The Rim Height Adjusting The Rim Height Backboard Upper Post Base • As assembled, the rim height is 3' (1 m). • To raise the rim height to 4', 5', or 6' (1.2 m, 1.5 m or 1.8 m), place your foot on the base and pull up on the backboard with both hands to remove the upper post from the base.
Page 8
Battery Battery Replacement Replacement Tip: We recommend the use of alkaline batteries for longer battery life! 1.5V x 3 "AAA" (LR03) Shown Actual Size Battery Compartment • Locate the battery compartment door on soundbox. • Loosen the screws in the battery compartment door with a Phillips screwdriver.
Need help?
Do you have a question about the K9125 and is the answer not in the manual?
Questions and answers