Advertisement
Quick Links
Keep this instruction sheet for future reference,
Keep this instruction sheet for future reference,
as it contains important information.
as it contains important information.
Tool needed for assembly: Phillips Screwdriver (not included).
Tool needed for assembly: Phillips Screwdriver (not included).
Water or sand is needed to fill the base (not included).
Water or sand is needed to fill the base (not included).
IMPORTANT! Backboard height should be adjusted only by an adult.
IMPORTANT!
Backboard height should be adjusted only by an adult.
fisher-price.com
fisher-price.com
Adult assembly is required.
Adult assembly is required.
1
DTM17
DTM17
Advertisement
Related Manuals for Fisher-Price DTM17
Summary of Contents for Fisher-Price DTM17
- Page 1 DTM17 DTM17 Keep this instruction sheet for future reference, Keep this instruction sheet for future reference, as it contains important information. as it contains important information. Adult assembly is required. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
- Page 2 Rinse clean with water to remove residue. Do not immerse this toy. • To prolong the life of the net, store this Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. toy indoors. Hearing-impaired consumers: 1-800-382-7470. • Do not leave this toy outside in freezing Outside the United States: weather.
- Page 3 Parts CAUTION This package contains small parts. For adult assembly only. Upper Post Backboard Net Assembly Collar Lower Post Hint: Some parts were placed inside the lower post for shipping. Ball Plug Base #6 x 1,6 cm Screw - 4 SHOWN ACTUAL SIZE Note: Label not shown...
- Page 4 Assembly Ring Tab Groove Ring • While holding the ring assembly and rim together, turn them over. • Insert four screws into the rim. • Partially tighten the screws with a Phillips screwdriver. Turn the rim over to ensure that the net loops are still in the grooves and through the ring tabs before completely tightening the screws.
- Page 5 Assembly Rectangular Tab Upper Post Base “T” End Plug • Bend the “T” end of the plug and insert it into the hole in the base. Note: After assembly is complete, fill the base with water or approximately 50 lbs. (22,7 kg) •...
- Page 6 Assembly PULL HERE Lower Post PRESS HERE Top View Groove Grooves IMPORTANT! Assembly of the lower post to the base is a permanent assembly. • Align the rib on the bottom of the lower post with the groove in the opening in the base. Hint: For easier assembly, apply a small Back View amount of liquid soap around the bottom of the...
- Page 7 Adjusting Rim Height Backboard Slots Upper Post Upper Post Lever Base Lower Post • As assembled, the rim height is 3 feet (1 m). • To raise the rim height to 4, 5 or 6 feet Base (1,2 m, 1,5 m or 1,8 m), place your foot on the base and pull up on the backboard with both hands to remove the upper post from the base.
- Page 8 Adjusting Rim Height Maintenance • This toy includes an inflatable ball. If the Slots Upper Post ball becomes soft, inflate it with a standard, manual air pump with a standard air needle. • The ball will contain the correct amount of air when its circumference measures about 21-22 inches (53-56 cm).
Need help?
Do you have a question about the DTM17 and is the answer not in the manual?
Questions and answers