Fisher-Price Digital Camera User Manual page 22

Troubleshooting
Problem
Photos are blurry
Cannot transfer pictures to
the computer
Product functions erratically
or does not function at all
22
Cause
Lens may be dirty or smudged
Camera moved when picture
was taken
Flash may not have
been charged
You are too close to your subject
USB cord may not be
properly connected
Static electricity may temporarily
stop the electronic function of
the camera and cause picture
loss. For example, walking
across the rug and touching
the camera may create
static electricity.
Batteries are weak
or exhausted
Solution
Clean the lens with a soft cloth.
Try to keep the camera steady when
you take pictures.
Wait for fl ash to fully charge before
you take a picture .
The focus range is from about
4 ft. (1.2 m) - infi nity
Check cord connections on both
your camera and your computer.
Reset the electronics by removing
the batteries and putting them back
in the battery compartment.
Replace the worn batteries with four,
new "AAA" (LR03) alkaline batteries.