Kodak EASYSHARE C1450 User Manual page 46

Troubleshooting
Status
You cannot take a
picture
Cannot find the
desired picture/video
Computer/connectivity problems
Status
Slide Show does not
run on an external
display device
Computer does not
communicate with
the camera
Direct printing (PICTBRIDGE enabled printer) problems
Status
Cannot print to a
PICTBRIDGE Printer
40
Solution
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way
■
Insert a new/charged battery
■
Memory is full. Transfer pictures to the computer
delete pictures
■
To view pictures on a card,
Solution
■
Adjust the camera Video Out setting to NTSC or PAL
page 33).
■
Make sure the external device settings are correct. (See the
device's user guide.)
■
Turn off the camera, then turn it back on.
■
Make sure the batteries are fresh and installed correctly
page 1).
■
Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer
turn on the camera.
■
See KODAK Software Help at www.kodak.com/go/camerasw.
Solution
■
In the Setup menu, change the Computer Connection setting to
Other Application
(see page
(see page 20), or insert another card.
see page
(see page 34).
www.kodak.com/go/support
(see page 4).
1).
(see page
19.
(see
(see
(see page 35). Then
35),