Table of Contents
Advertisement
This vehicle features a removable handle so parents can
"guide" young drivers. Follow assembly steps 23 and 24
to assemble the handle to your vehicle.
Important! To prevent damage to the motors and gears,
do not use the handle to push the vehicle if your child is
not pressing the foot pedal.
23
Storage
Compartment
• Position the handle so that it arcs away from the
handlebar. (The screw holes in the back side of the
handle should face through the rear of the vehicle).
• Fit the bottom of the handle into the storage compartment.
Push firmly to make sure the handle is fully inserted into
the compartment.
Handle
Assembly
24
• Insert a #12 x 1
and into the handle.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
14
#12 x 1
Shown Actual Size
1
/
" screw through the back of the vehicle
4
Screw
1
/
" Screw
4
Advertisement
Table of Contents
