Barbie 74518 Owner's Manual & Assembly Instructions page 12

12
Inner Shock Half
Outer
Shock
Half
• Fit and hold an inner shock half to the inside of
a handlebar.
• Fit and hold an outer shock half to the outside of the
same handlebar.
• Make sure the top ends of the shock halves fit under
the fender.
13
Front Axle
• Slide the front axle through the hole in the shock halves
and handlebar.
14
• Fit a wheel bushing into the hole in the center of the
front wheel.
• Repeat this procedure to fit another wheel bushing into
the hole on the other side of the front wheel.
Assembly
15
Fender
• Fit and hold the hubcaps to each side of the front wheel.
• Make sure the posts on the inside of the hubcaps fit into
the indentations on the front wheel, so that the hubcaps
lay flat against the wheel.
16
Front Wheel
Front Axle
• Position the front wheel between the handlebars.
• Slide the front axle through the front wheel.
17
Inner
Front Wheel
Shock
Half
• Fit and hold an inner shock half to the inside of the
exposed handlebar.
Wheel Bushing
• Fit and hold an outer shock half to the outside of the
same handlebar.
• Make sure the top ends of the shock halves fit under
the fender.
12
Front Wheel
Outer Shock Half
Front Wheel
Hubcap
Fender