Page 1
V7505 Actual product may appear different than the product shown. Please keep this instruction sheet for future reference, as it contains important information. Requires three “AA” batteries (included). Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included).
Page 2
Assembly Assembled Parts CAUTION This package contains small parts in its unassembled state. Adult assembly is required. Take extra care during unpacking and assembly. Handlebar - 2 Pieces Body Seat Body Base • Fit the body onto the base, as shown. Base #8 x ”...
Page 3
• Turn the assembly upright. • Fit the seat onto the assembly. • Insert two screws into the holes on each side of the seat and tighten. Assembly Short Handlebar Seat • First, insert the long handlebar through the hole in the pony head Hint: You may need to turn the long handlebar to fit it into the hole.
Battery Replacement For best performance, we recommend that you replace the batteries that came with this toy with three, new “AA” (LR6) alkaline batteries. • Locate the battery compartment side of the pony. • Loosen the screws in the battery compartment door with a Phillips screwdriver.
Page 5
Roll-Along with Music Power/Volume Switch Press the button on the pony's head for musical tunes. • Slide the power/volume switch on the toy to on with low volume ; on with high volume or off...
Need help?
Do you have a question about the V7505 and is the answer not in the manual?
Questions and answers