Page 1
V1643 Actual product may vary from the photos. Please keep this instruction sheet for future reference, as it contains important information. Requires six "AA" (LR6) alkaline batteries (not included) for car operation. Adult assembly is required. Tool required for battery installation: Phillips screwdriver (not included).
Page 2
Each track piece has a number on the bottom. Simply match the numbers and fit the pieces together! For best performance, we suggest assembling the track on a hard, flat surface. Fit the billboard posts into the sockets in the track. Fit the tunnel onto the bridge track.
Battery Installation 1,5V x 6 "AA" (LR6) • Locate the battery compartment door on the bottom of each car. • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert three "AA" (LR6) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life.
Page 5
• Slide the power switch on the bottom of each car ON . • Shake a car to start the "engine" and the sound effects. Hint: For maximum distance, shake the car 7 or 8 times. Shaking more than this does not increase the distance it will travel.
Need help?
Do you have a question about the V1643 and is the answer not in the manual?
Questions and answers