VC3
v2
- User's guide
Pro Channel
THE THREE PARTS IN COMBINATION
The 'order' of the parts of the ProChannel is logical; first the input stages,
either microphone or line (instrument) input. This is followed by the
'INSERT' where the audio can 'loop' through other outboard equipment.
The next stage is a mixer stage where the input from 'insert' mixes with the
'mix in' jack-socket. There is no volume control on this 'mix' input. This is
followed by the JOEMEEK compressor and then the Enhancer.
The output stage buffers the output of the enhancer so that the ProChannel
can drive into any sort of mixer or power amplifier.
7