Joemeek Pro Channel VC3 v2 User Manual page 17

THE METER
The first green LED of the meter array stays on all the time to show that
power is on.
The second green LED lights at an output level of -12dB
The first yellow LED lights at an output level of -6dB
The second yellow LED lights at an output level of 0dB
The red LED lights at an output level of +8dB
(these levels refer to the output when the output control is at maximum)
OVERALL PERFORMANCE
Frequency response +0 -0.5dB 10Hz to 50KHz Low frequency accuracy
maintained to get clear unmuddled bass sounds onto digital recorders.
Harmonic distortion less than 0.01% except where compression affects low
frequency wave shape.
Noise generally 100dB below input (125.5dB below input on mic at more
than 50dB gain)
THE POWER SUPPLY
An external 12V AC power supply provides the power for the unit. DO NOT
ATTEMPT TO POWER THE UNIT FROM ANY POWER SUPPLY OTHER
THAN THE ONE SUPPLIED WITH THE UNIT. Circuitry inside the unit
converts the 12V AC into 14.5-0-14.5V and 48V DC supplies for the
amplifiers and the phantom power.
Power rating is 5 watts.
SAFETY
The unit complies fully with European Cenelec requirements (CE) and may
be used in all territories subject to safety approval of the power supply to
local regulations.
WARRANTY
In the unlikely case of a breakdown, please return the unit and power
supply in its original packing through the supplier.
The unit will be attended to immediately and returned to your supplier.
If any breakdown occurs (excluding physical mistreatment) within 12
months of purchase, no service charge will be made.
VC3
v2
Pro Channel
16
- User's guide