Advertisement
Assembled Parts
Seat
Body
1
#8 x
/
" Screws – 12
2
Shown Actual Size
Note: Tighten and loosen all screws with a Phillips
screwdriver. Do not over-tighten screws.
2 Side Rails
Handlebar
(2 Pieces)
2 Fins
Base
This package contains small parts in its unassembled
state. Adult assembly is required. Take extra care
during unpacking and assembly.
1
• Fit the tabs on one of the side rails into the slots in the body.
Push to "snap" in place.
Hint: The side rails are designed to fit one way. If they do not seem
to fit, try the other side.
• Repeat this procedure to assemble the other side rail.
Fin
2
• Fit a fin into each side of the body.
• Insert a screw into the fin and tighten.
2
Assembly
CAUTION
Body
Side Rail
Fin
Screw
Advertisement
