ION Film 2 SD Quick Start Manual page 8

Film Type
Here, select the type of film you have placed in the film
holder.
1. Color Negative
2. Slide
3. Black & White Negative
USB Mode
USB Mode allows you to transfer images from your SD card directly to your computer. While in
USB Mode, FILM2SD becomes an SD card reader for your computer. To enter USB mode, you
can either:
Leave the power adapter unplugged and connect the FILM2SD to a USB port via the
included USB cable.
If the power adapter is plugged in and the FILM2SD is powered on, connect the
USB cable to your computer, then select the USB icon; a USB symbol should
appear on the DISPLAY, signifying that the connection has been established.
Note: While FILM2SD is in USB Mode, you will not be able to scan other pictures. To enable
scanning again, remove the USB cable, turn off FILM2SD, then turn it on again.
6
1
2
3