ION Film 2 SD Quick Start Manual page 4

PLACING SLIDES & NEGATIVES IN THE HOLDERS
1. Open the film holder by
lifting the tab on the bottom.
2. Insert the slide(s) into the
slide slot(s) or lay the
negative over the negative
slot.
3. Close the film holder.
Note: If the image is scanned upside down or mirrored, you can also correct this by using the
FLIP or MIRROR buttons later.
Tip: To avoid laying a negative in the wrong direction (which will produce a mirror image), be
sure you can correctly read the serial numbers at the top of the negative when placing it in the
holder.
Slides
2
Negatives