Control Panel - Haier HMS1000TVE Service Manual

Control Panel

B: Power Switch
Press this button to switch on the washing machine. Press it again to switch it off.
C: Start / Pause Button
When the washing machine is connected to the power socket and a program is
selected, washing operation will start. Lightly touch this button during a wash
cycle, operation will stop and the digits on the screen start blinking. Touch it
again to resume operation. To cancel a wash program during a wash cycle,
touch this button, when the digits on the screen start blinking, press the Power
switch, the program will be cancelled.
D: Spinning Speed Setting Button
Touch this button lightly to select the desired speed. When a speed is set, it will
be displayed on the screen.
Note: Different water temperatures and spinning speeds can be set for different
laundries. Refer to the operation instructions on pages 11 and 14. Wash using the
default settings if there is no special requirement.
E: Washing temperature button
Touch this button lightly, the washing temperature will be displayed on the
screen. Select a temperature according to the type of laundry.
Front Load Washer
Delay
Pre-wash Cotton Synthetic Wool Cashmere Silk
Quick Wash Rinse
Power
Spin
Temperature Start/Pause
HMS1000TVE
HMS1000TVE
Spin Drain
On
Of f
13