Installation - Sanyo SA-76P Instruction Manual

Installation

Installation precaution:
Window type conditioner is so valuable and the improper installation of
it will cause a lot of damage! Please associate the professional techni-
cian to install the unit and don' t install it by yourself.
Otherwise, we are not responsible for the damage like this.
Before installation, check that the voltage of the electric supply in your
home or office is the same as the voltage shown on the name plate.
Location:
The condensation water must be drained away conveniently.
Install air conditioner unit far away from T V set or radio etc. to avoid disturbing video or voice.
In salt and coastal area or place where is near thermal springs and polluted by sulphurous gas, or other special areas,
please contact the seller before use.
Avoid a place where is possible for inflammable gas to leak out.
Avoid other heat sources or direct sun light.
Avoid a place where is easy for children to touch.
How to install:
Choose a location where there are no any obstacle surrounding the unit.
Prepare the installation hole slightly bigger than unit size.
Choose the installation space according to the following diagram.
*W mm
*H mm
* See Table 1 on page 2 for unit
dimension (W x D x H) mm.
*D mm
4