Care And Maintenance - Sanyo SA-76P Instruction Manual

Care and maintenance

Always turn off the air conditioner and main power supply before cleaning to ensure safety.
Clean unit
1. Plug out first before cleaning.
Plug out only after
air conditioner
stops at all.
2. Clean surface panel with a soft
and dry cloth, Which is soaked
warm water below 40
3. Do not use chemical solvent for cleaning.
4. Do not splash water directly to indoor
unit, in which there are micro-computer
and circuit plate, they must not be
touched by water.
* Check earth wire
Is it broken
or loose?
.
12
Air filter
The air filter behind the intake grille should be washed at least
every two weeks or as often as it needs cleaning.
How to clean the air filter:
1. To remove the air intake grille, grasp the tab on the filter
and pull to take out.
2. Vacuum the filter on the dusty side to remove light dust.
3. Wash the filter, cleaner side up under gently flowing water
to wash out accumulated dust and lint.
4. If the filter is very dirty, use a mild household detergent in
the wash water.
Let the filter dry thoroughly before reinstalling it. Do not
operate the air conditioner without the air filter. This
can damage the unit.
* Check air inlet and outlet of outdoor unit.
Air lock could result
in bad efficiency.
Vacuum cleaner