Advertisement
Maintenance lnstructions
l . B e l t A d j u s t m e n t :
(1)Belt adjustment and tension performs two functions:
The distance between belt and motor cover from left to right within +/-5MM,
then needed to be adjusted.
Adjust belt by speed not more than 2. sMPH.
Nonal position of bett as
Molor Cover
Walk belt
Adjustment Here
A. Walking Belt is shifting to the fight:
Using hex key provided, turn the right rear roller
adjustment bolt turn in the clockwise direction
shown as below or on the contrary direction.
B. Walking Belt is shlftlng to the right:
Using hex key provided, turn the right rear roller
adjustment bolt turn in the clockwise direction
shown as below or on the contrary direction.
(2)Walking belt is
Slight walking belt
key provided, turn
distance.
S l i p p i n g d u r i n g u s e :
slipping is on normal while using for a period Using the hex
both left and right rear roller adjustment bolts in the same
t 6
Advertisement
