Fujitsu GA-7VAXFS User Manual page 18

5) ATX (ATX Power)
+12V
5V SB
(Stand by +5V)
Power Good
GND
VCC
GND
VCC
GND
3.3V
3.3V
6) FDD (Floppy Connector)
7) IDE1 / IDE2 (IDE1 / IDE2 Connector)
1
GA-7VAXFS Motherboard
20
VCC
VCC
-5V
GND
GND
GND
PS-ON(Soft On/Off)
GND
-12V
3.3V
1
1
1
Ø AC power cord should only be connected to
your power supply unit after ATX power cable
and other related devices are firmly connected
to the motherboard.
Ø Please connect the floppy drive ribbon cables
to FDD. It supports 360K, 1.2M, 720K, 1.44M
and 2.88M bytes floppy disk types.
The red stripe of the ribbon cable must be the
same side with the Pin1.
Ø Important Notice:
Please connect first hard disk to IDE1 and
connect CD-ROM to IDE2.
The red stripe of the ribbon cable must be the
same side with the Pin1.
- 18 -