Fujitsu GA-8STXC P4 Titan-DDR User Manual page 11

Step 3: Install expansion cards
1. Read the related expansion card's instruction document before install the expansion card into the
computer.
2. Remove your computer's chassis cover, screws and slot bracket from the computer.
3. Press the expansion card firmly into expansion slot in motherboard.
4. Be sure the metal contacts on the card are indeed seated in the slot.
5. Replace the screw to secure the slot bracket of the expansion card.
6. Replace your computer's chassis cover.
7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
8. Install related driver from the operating system.
AGP Card
Issues To Beware Of When Installing CNR
Please use standard CNR card like the one in order to avoid mechanical problem.
Standard CNR Card
GA-8STXC Motherboard
Please carefully pull out the small
white-drawable bar at the end of the
AGP slot when you try to install /
uninstall the AGP card. Please align
the AGP card to the onboard AGP
slot and press firmly down on the
slot. Make sure your AGP card is
locked by the small white-drawable
b a r .
- 11 -