Page 1
L5066 Please keep this instruction sheet for future reference, as it contains important information. Requires three “AA” batteries (included). Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). www.fisher-price.com...
Page 3
CAUTION This product contains small parts. For assembly by an adult. Take extra care during unpacking and assembly. Chutes Base • Position the base upside-down on a flat surface. • Fit the two chutes into the openings in the base, as shown. •...
Page 4
Post Bear • Press and “snap” the bear onto the post on the arch, as shown. Hint: This may require some force. • Insert a screw into the back of the bear and tighten to secure it to the post. Assembly Paddle •...
Assembly • Attach the soft ball and links to the paddle. • Attach the hanging toys to the bear’s “paws.” • Or, remove the links and fit the hanging toys into the slots in the chutes, as shown. • The gym is now set up for “Overhead Gym” mode. Before Use CAUTION Please keep small parts such as plastic...
Battery Replacement For best performance, we recommend that you replace the batteries that came with this toy, with three, new “AA” (LR6) alkaline batteries. • Locate the battery compartment on the back of the bear. • Loosen the screws in the battery compartment door with a Phillips screwdriver.
Page 7
Overhead Gym to Sit-Up Activity Center Press • First, remove the soft ball from the paddle, then press and hold the two buttons on the hubs. Lower the arch down until it “clicks” into position. Press • Press and hold the two buttons on the hubs, then lower the arch down until it “clicks”...
Flashing Lights and Lively Music! WARNING To prevent entanglement injury, never place the gym in a crib or playpen. Never add strings, ties or other products to the gym. • Slide the power/volume switch on the back of the bear to on with low volume ;...