Page 2
Parts A. 3 End Rails B. Small Tower with Toll Booth C. 3 Small Towers D. Main Tower E. 4 Side Rails F. 4 Supports G. Span H. 2 Span Ends Part not shown: 1 Figure...
Page 3
Assembly SPAN SPAN ENDS • Locate the square mark on both the side of a support and on the span assembly. Match the squares and “snap” the support into the underside of the span assembly, as shown. • “Snap” the remaining supports into the span matching the square marks on each.
Page 4
Assembly SQUARE SMALL TOWERS • “Snap” the end rails to the small towers, as shown. SMALL TOWER WITH TOLL BOOTH • Locate the square mark near the bottom of each small tower. • With the square marks facing out, “snap” the small towers and tower with toll booth to the side rails, as shown.
Page 5
So Many Ways to Play! • Remove the supports for a ground- level bridge. Multiple Levels of Track Layouts! Track not included. • Use supports and straight tracks (sold separately) to build an elevated assembly. • The toll gate lifts and lowers. •...
Need help?
Do you have a question about the GEOTRAX L5893 and is the answer not in the manual?
Questions and answers