Novell Netware - Planet FPS-1UA User Manual

Novell NetWare

Problem No. 1 My Print Server cannot print the jobs sent to the print queue.
Solution No. 1 Try the following:
1. Check if the printer attached to the Print Server is on-line.
2. Check if your Print Server is logged into the file server (See
3. Check the current status of the queues used by the Print Server,
4. Check if the NetWare printer number is correct.
5. Check to see if the Print Server is a static queue server to the
6. The total number of queues to be serviced may be over the limit
Problem No. 2 My Print Server is configured as a Novell Print Server, and cannot
log in to a File Server.
Solution No. 2 The following steps may solve this problem:
1. Check the Novell file server's name. If it is over 20 characters
2. Check that the Print Server's configuration data, especially the
3. Check the NetWare server. If using Bindery mode, check the
4. If the Print Server is servicing more than one file server, check
Problem 2 below.).
and ensure the queues are active.
0 = parallel port 1 of the Print Server.
1 = parallel port 2 of the Print Server.
2 = serial port or parallel port 3.
queue.
Locate the Print Server Object, and check the Queues Serviced
by Printer. Ensure that the correct queues are on the list.
of 56. If so, reduce the number of queues.
long, rename it using no more than 20 characters.
password, is correct.
master file server to see if the login status of the Print Server is
Ready. If it is not, check the error message and perform the re-
quired corrective action.
to see that all required file servers are in the list of "File Servers
To Be Serviced". If not, insert the required file server name to
the list.
Page 70