Advertisement
Battery
Information
SHOWN ACTUAL SIZE
We recommend the use of alkaline
batteries for longer battery life
Battery Installation
Engine
• Locate the battery compartment on the back of
the engine
• Loosen the screws in the battery compartment
door with a Phillips screwdriver. Lift the battery
compartment door and insert three "AAA" (LR03)
alkaline batteries.
• Close the battery compartment door and tighten
the screws with a Phillips screwdriver. Do not
over-tighten.
IMPORTANT! Under normal use conditions, the batteries in the engine will require
replacement more often than the batteries in the remote controller. For additional
information, see the troubleshooting section.
Remote Controller
• Locate the battery compartment on the side
of the remote controller.
• Loosen the screw in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door and insert three
"AAA" (LR03) alkaline batteries.
• Replace the battery compartment door and
tighten the screw with a Phillips screwdriver.
Do not over-tighten.
Battery Safety Information
Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or
• Never short-circuit the battery terminals.
batteries of different types: alkaline,
• Use only batteries of the same or
standard (carbon-zinc) or rechargeable
equivalent type, as recommended.
(nickel-cadmium).
• Do not charge non-rechargeable batteries.
• Insert batteries as indicated inside the
• Remove rechargeable batteries from the
battery compartment.
toy before charging.
• Remove batteries during long periods of
• If removable, rechargeable batteries are
non-use. Always remove exhausted
used, they are only to be charged under
batteries from the toy. Dispose of batteries
adult supervision.
safely. Do not dispose of batteries in a fire.
The batteries may explode or leak.
Your child is bound for
Your child is bound for
1.5V x 6
"AAA" (LR03)
a world of adventure!
a world of adventure!
.
POWER
READY
BUTTON
LIGHT
The more you
collect, the more
fun it gets!
Multiple track packs used to create this configuration.
Each sold separately & subject to availability.
All Aboard!
• Hook the cars together and place
them on the track. Make sure the
engine is in front.
Hint: We do not recommend using the
engine on carpets. For best performance,
use on the track provided or hard,
flat surfaces.
3-Position Remote Controller
3
2
1
1
OFF
2
FORWARD
3
FORWARD
(With Sound Effects)
• Press the power button on top of the
engine. The ready light turns on.
• Hold the remote controller with the
stick facing you. Point the remote
controller toward the engine and
push the stick forward. The engine
moves forward around the track.
• To stop the engine, pull the stick
backwards to the stop position.
Hints:
• If you do not operate the remote
controller for a few minutes, the
engine shuts off and the ready
light turns off. Press the engine
power button, and operate the
remote controller to restart.
• This toy works best if you have a
clear path between the remote
controller and the engine. Point
the remote controller at the engine.
The maximum range of the remote
controller is about 12 feet.
WARNING
To prevent entanglement,
keep hair away from wheels.
Advertisement
