Planning Your Program; Entering Your Program - Sears 1F80-382 Installation And Operation Instructions Manual

Planning Your Program
Look at the factory preprogrammed times and temperatures
shown in the sample schedule. If this program will suit your
needs, simply press the RUN button to begin running the factory
preset program.
If you want to change the preprogrammed times and tempera-
tures, follow these steps.
Determine the time periods and temperatures for your weekday
and weekend programs. You must program four periods for
both the weekday and weekend program. However, you may
use the same heating and cooling temperatures for consecutive
time periods. You can choose start times, heating tempera-
tures, and cooling temperatures independently for both week-
day and weekend programs (for example, you may select 5:00
AM and 70 ° as the weekday 1st period heating start time and
temperature, and also choose 7:00 AM and 76 ° as the weekday
1st period cooling start time and temperature).
Use the following table to plan your program time periods and
the temperatures you want during each period. Fill in the
complete table to have a record of your programs.
Entering Your Program
Follow these steps to enter the heating and cooling programs
you have selected.
Set Current Time and Day
1. PressTIME button once. The displaywill showthe houronly.
EXAMPLE: ;2: PM i
2. Press and hold either(_ or(_ until you reach the correct
hour and AM/PM designation (AM begins at midnight; PM
begins at noon).
3. Press TIME once. The displaywindowwill showthe minutes
only.
EXAMPLE: "U
4. Press and hold either(_ or(_ until you reach the correct
minutes.
5. PressTIME once. The display will showthe dayofthe week.
6. Press (_ or(_ until you reach the current day of the week.
7. Press RUN once. The display will show the correct time and
room temperature alternately.
SAMPLE
Heating/Cooling Schedule Plan (Factory Program)
WEEKDAY (5 DAY) SATURDAY (1 DAY) SUNDAY (1 DAY}
Start Start Start
Period Time Temperature Time Temperature Time Temperature
1ST 6:00 AM 70°F 6:00 AM 70°F 6:00 AM 70°F
2ND 8:00 AM 62°F 8:00 AM 62°F 8:00 AM 62°F
! 3RD 5:00 PM 70°F 5:00 PM 70°F 5:00 PM 70°F
4TH 10:00 PM 62°F 10:00 PM 62°F 10:00 PM 62°F
1ST 6:00 AM 78°F 6:00 AM 78°F 6:00 AM 78°F
2ND 8:00 AM 85°F 8:00 AM 85°F 8:00 AM 85°F
O
O 3RD 5:00 PM 78°F 5:00 PM 78°F 5:00 PM 78°F
4TH 10:00 PM 82°F 10:00 PM 82°F 10:00 PM 82°F
Enter Heating Program
1. Move the SYSTEM switch to HEAT.
2. Press PRGM once. "MO TU WE TH FR" (indicating week-
day program) will appear in the display. Also displayed are
the currently programmed start time for the 1st heating
period and the currently programmed temperature (flash-
ing).
EXAMPLE: [M_-- -TU-wI_R'AM _ jl_,
I__r "l__lI__l
This display window shows that for the 1st weekday period,
the start time is 6:00 AM, and 68 ° is the programmed
temperature (this example reflects factory preprogramming).
3. Press (_) or (_ to change the displayed temperature to
your selected temperature for the 1st heating program
period.
4. Press TIME once (the programmed time will flash). Press
(_ or (_ until your selected time appears. The time will
change in 15 minute increments. When your selected time
is displayed, press TIME again to return to the change
temperature mode.
5. Press PRGM once. The currently programmed start time
and setpoint temperature for the 2nd heating program
period will appear.
6. Repeat steps 3 and 4 to select the start time and heating
temperature for the 2nd heating program period.
7. Repeat steps 3 through 5 for the 3rd and 4th heating
program periods. Weekday heating programs are now com-
plete.
8. Press PRGM once. "SA" (indicating Saturday program) will
appear in the display, along with the start time for the 1st
heating period and the currently programmed temperature.
9. Repeat steps 3 through 7 to complete Saturday heating
programming.
10.Press PRGM once. "SU" (indicating Sunday program) will
appear in the display, along with the start time for the 1st
heating period and the currently programmed temperature.
11.Repeat steps 3 through 7 to complete Sunday heating
programming.
12.When you have completed entering your heating program,
press RUN.
Heating/Cooling Schedule Plan
WEEKDAY (5 DAY) SATURDAY (1 DAY) SUNDAY (1 DAY)
Start Start Start
Period Time Temperature Time Temperature Time Temperature
1ST
_ 2ND
IJA
! 3RD
4TH
1ST
_ 2ND
O
O 3RD
4TH