Built-In Cd Player; Playing A Cd; Selecting A Track Directly - Pioneer DEH-P780MP Operation Manual

Built-in CD Player

Playing a CD

3 3 3
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1 Track number indicator
Shows the track number currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
3 Disc title indicator
Shows the title of the currently playing disc.
! If no title has been entered for the cur-
rently playing disc, nothing is displayed.
1 Press SOURCE to select the built-in CD
player.
Press SOURCE until you see Compact Disc
displayed.
# If no disc is loaded in the unit, you cannot se-
lect Compact Disc (built-in CD player). Insert a
disc in the unit. (Refer to page 14.)
2 To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
# If you select Rough search, pushing and hold-
ing MULTI-CONTROL left or right enables you to
search every 10 tracks in the current disc. (Refer
to Selecting the search method on page 21.)
3
track, push MULTI-CONTROL left or right.
Pushing MULTI-CONTROL right skips to the
1 1 1 1 2 2 2 2
start of the next track. Pushing
MULTI-CONTROL left once skips to the start
of the current track. Pushing again will skip to
the previous track.
When a CD TEXT disc is inserted, the disc title
automatically begins to scroll in the display.
When Ever Scroll is set to ON at the initial setting,
the disc title scrolls continuously. Refer to Switch-
ing the Ever Scroll on page 67.

Selecting a track directly

When using the remote control, you can select
a track directly by entering the desired track
number.
1
Track number input display appears.
2
track number.
# You can cancel the input number by pressing
CLEAR.
3
The track of entered number will play.
After entering the number input mode, if you do
not perform an operation within about eight sec-
onds, the mode is automatically canceled.
To skip back or forward to another
Note
Press DIRECT.
Press 0–9 buttons to enter the desired
Press DIRECT.
Note
Section
05
19
En