Viewing The Wide-Screen Picture Formats (480I And 480P Signals Only) - Toshiba 20HLV86 Owner's Manual

÷
Viewing the wide-screen picture formats
(480i and 480p signals only)
You can view 480i and 480p format programs in a variety of picture
sizes--Natural, TheaterWidel, TheaterWide2, TheaterWide3 and Full.
The way the image displays in any of the picture sizes will vary
depending on the format of the program you are viewing. Select the
picture size that displays the current program the way that looks best
to you.
Selecting the picture size
1. Press PIC SIZE on the remote control.
2. Press the corresponding number button (0-4) to select the desired
_icture size, as described below and on the next page.
P_CTURE _ZE
1. THEATER W_DEI
2. THEATER W_DE2
3. THEATER W_DE3
4. FULL
Natural picture size
• The image is displayed close to its originally formatted proportion.
Some program formats will display with side bars and/or bars at the
top and bottom.
Natural picture size example: The way the image displays will vary
depending on the format of the program you are currently watching.
Conventional (4:3) picture Conventional (4:3) picture in
on a conventional TV Natural size on your wide-screen
screen TV
TheaterWide 1 picture size (for 4:3 format programs)
• The center of the picture remains
close to its original proportion, but
the left and right edges are
stretched wider to fill the screen.
• The top and bottom edges of the
picture may be hidden; however,
this mode cannot be scrolled.
TheaterWide 1 picture size
example
0-4
Pic Size
Note:
You also can change the picture size by
selecting PICTURE SIZE in the SETUP
menu.
A
CLOSED CAPTtON OFF
PICTURE _CR_
ASPECT
SACK LIGHTING
Ig_:$ELECT l_.t :AD JUST
Using these functions to change the
picture size (i.e., changing the height/
width ratio) for any purpose other than
your private viewing may be prohibited
under the Copyright Laws of the United
States and other countries, and may
subject you to civil and criminal liability
33
5X20321A(E)P33-40 33 _ 2/1/32, 2:59 AM