Setting The Hdmi® Audio Mode - Toshiba 24V4210U User Manual

Setting upyourTV 55
Setting the HDMI® audio mode
2 Press the (A/Y arrow) buttons to select a channel position to
be locked, and then press the OK button. Enter your four-digit
PIN code.
A check appears in the box. To remove the check, press the OK
button again.
NOTE
If thePINcodehasnotbeensetyet,a warningmessage a ppears.
3 To save the setting, press the EXIT button.
To manually add digital sub-channels on a physical channel:
Use the Channel Numbers and the Dash/100 button on the remote
control to enter the channel number (for example, 56-1). If the
channel is found, the number will be added to the list and the box
will be unchecked.
If the channel is not found, a message appears.
NOTE Skippedchannels cannotbeselected with theCH Up/Down arrow)
buttons; h owever, theycanbeaccessed usingthenumberkeyson
theremote control.
To remove encrypted channels from the channel memory:
If an encrypted channel is accidentally added to the channel list
while programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel surfing.
When you tune to an encrypted channel, the following message
appears.
(Sample Illustration) Removing an enc_37)ted channel
Press the 1 button while the message is displayed to remove the
unnecessary channel from the channel list.
Setting theHDMI ® audio mode
To set the HDMI _ audio mode:
1 Press the MENU button to open the Sound menu.
2 Highlight Audio Setup, and then press the OK button.