Table of Contents
Advertisement
nnecting
to a TV or audio system
Connect the player to your TV or audio system.
For details of output sound, see [_.
to a TV
To S VIDEO OUT
If the TV has an S video input,
connect the player with an S
video cable. When using an S
video cable, do not connect the
yellow video cable.
Audio/video
cable (supplied)
To audio inputs
To video input
S video cable (not supplied)
I
Make the following
setting.
On-screen display
Select:
Page
"Digital Out....
Analog 2ch"
[_
"AV-OUT ....
CVBS/S-VlDEO"
[_
_
Signal flow
(white)
To S video input
TV or monitor with
audio/video inputs
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• Connect the player directly to your TV. If you connect the player to a VCR, TV/VCR combination or video selector, the
playback picture may be distorted as DVD video discs are copy protected.
•
To switch
LCD screen
/ Memory
Card / AV-IN
Select a mode other than AV-IN to output to an external
device connected
to the player.
Press MODE button on the player.
MODE
Each time the button is pressed,
the
O
LCD will change as below.
•-i. J_l
Normal
1
Memory Card
1
AV-IN
Normal:
Outputs
video and audio to the LCD
of the player only.
Memory
Card: To switch to the Memory
Card mode.
AV-IN:
Inputs video and audio from an
external
device such as aVCR
connected
to the LCD of the player,
thus allowing
you to view video on
the LCD of the player.
Notes
• Normal will be set the next time the player is turned on even
if you turn the power of the player off while AV-IN is set.
54
Advertisement
Table of Contents
