Locking Video Input; Setting The Gametimer Tm - Toshiba FSTPURE COLORSTREAM 20AF46 Owner's Manual

÷
÷
To unlock channels:
1. Press MENU, then press { or _, to display the OPTION menu.
2. Press A or v to highlight LOCK and then press { or ]_ to display
the LOCK menu.
3. Use the Channel Number buttons (0-9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
4. Press A or v to highlight CH LOCK and press { or ]_ to display
the CH LOCK menu.
5. Press { or _, to highlight CLEAR, and then press ENTER. This
clears all channels from the list of locked channels.
6. Press EXIT to return to normal viewing.
Locking video input
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, COLORSTREAM) and channels 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel buttons unless you clear the setting.
To set up the video lock:
1. Press MENU, then press { or _ to display the OPTION menu.
2. Press A or v to highlight LOCK.
3. Press { or _" to display the LOCK menu.
4. Use the Channel Number buttons (0-9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
5. Press A or v to highlight VIDEO LOCK.
6. Press { or _" to select:
• OFF: Unlocks all video input
sources.
• VIDEO: Locks VIDEO1, VIDEO2
and COLORSTREAM.
OH LOCK START •
• VIDEO +: Locks VIDEO1, VIDEO2,
COLORSTREAM, channel 3 and
channel 4. This option should be
used if you use the antenna terminal
to play a video tape.
7. Press EXIT to return to normal viewing.
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
GAMETIMER OFF
NEW PIN CODE START •
SELECT • • ADJUST _1 •
Setting the GameTimer TM
With the GameTimer
TM
feature, you can automatically activate the
VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a
TV game (30, 60, 90 or 120 minutes).
To set up the GameTimer:
1. Press MENU, then press { or > to display the OPTION menu.
2. Press A or v to highlight LOCK.
3. Press { or _" to display the LOCK menu.
4. Use the Channel Number buttons (0-9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
5. Press A or v to highlight GameTimer.
6. Press { or > to select a time limit (30 minutes, 60 minutes, 90
minutes, 120 minutes or OFF).
7. Press EXIT to return to normal
viewing. After the GameTimer is
programmed, the display will appear
briefly every ten minutes to remind you
that the GameTimer is operating.
When the programmed time is
reached, the display will change the
channel automatically.
IP,cToJ Au0,olsE 0
OH LOCK START •
VIDEO LOCK OFF
_;OFF 30 60 90 120
NEW PIN CODE START •
SELECT •• ADJUST 4 •
Channel
Menu/
Enter
Note:
After programming VIDEO LOCK, change
channels or activate the TV/VIDEO key before
turning off the television.
Channel
Menu/
Enter
÷
2O
J3S10321A(E) P14-25 20 _ 21/12/05, 12:33 PM