Drive System Maintenance; Chec_Ng The Tire Pressure - Toro TimeCutter Z4200 Operator's Manual

1.
,
Figure 37
Main-30 amp 2.
Charge circuit-25 amp
Return the control panel to its original position. Use
the four screws removed previously to secure the
panel to the machine.
Drive System
Maintenance
Checking the Tire Pressure
Service Interval: Every 25 hours--Check tire pressure.
Maintain the air pressure in the front and rear tires as
specified. Uneven tire pressure can cause uneven cut.
Check the pressure at the wflve stem (Figure 38). Check
the tires when they are cold to get the most accurate
pressure reading.
Tire Pressures
Model Rear Tire Front Tire (caster
wheels)
74360 13 psi (90 kPa) 50 psi (344 kPa)
1. Valve stem
G000554
Figure 38
33