Hitachi CP-WX8240 User Manual page 4

Drawing function
Using the Drawing Function (continued)
4. Eraser
5. Erase
6. Projector
Operation
(continued on next page)
4
Switches the electronic pen function to that of an eraser and specifies
its size. The cursor turns into an Eraser
previously drawn lines.
Specifies a 12-dot Eraser.
Specifies a 20-dot Eraser.
Specifies a 28-dot Eraser.
Erases all the lines drawn with the pen.
Operates the projector.
Calls up and display the previous file in the USB memory
device from that currently selected. This function is available
when the projector is displaying a file from a USB memory
device.
Calls up and display the next file in the USB memory device
from that currently displayed. This function is available when
the projector is displaying a file from a USB memory device.
Displays thumbnails of files recorded on a USB memory
device. You can display an image onto the projector screen by
touching its thumbnail.
Saves the image on the projector screen, along with any text
or pictures drawn, onto a USB memory device connected to
the projector.
• Files are saved with the file name "Pxxx.bmp" (where xxx is
a consecutive number) into a folder named "PJ_Capture".
If it does not already exist, a "PJ_Capture" folder is created
automatically.
• The time stamp of saved files are as per the date and time
settings of the projector. Check the DATE AND TIME setting
for WIRELESS SETUP or WIRED SETUP in the NETWORK
menu (&Operating Guide - Network menu).
• The tool bar is not saved.
• Copyright protected images cannot be saved.
• Drawing with this function is not saved to the projector's
"MyScreen".
; dragging it erases