Advertisement
On-Screen
Display
Menu
,
=
Adjusts
the pbture
to your preference
witlq the
following
picture
settings.
Backlight
The screen dims
The screen
brightens
Contrast
For less contrast
For more contrast
Brightness
For bss
For more
brightness
brightness
Color
For bss color
For more color
intensity
intensity
Tint
Skin tones
Skin tones
become reddbh
become greenish
Sharpness
For less
For more
sharpness
sharpness
For resetting all Picture adjustment items to the factory
preset values, press _./T
to sebct "Reset", press ENTER,
press 41/1_ to sebct "Yes", and then press ENTER.
Automatically
adjusts
the brightness
of the screen.
Off: The brightness is fixed at the vahJe set in "Backlight".
On: Automatically adjusts.
On: Display: Displays the OPC effect on the screen whib
adjusting the brightness of the screen.
o When set to "On", the Optical Picture Control (OPC) senses
the surrounding light and automatically adjusts the bacHight
brightness. Make sure nothing obstructs the OPC sensor,
which could affect its ability to sense surrounding light.
o When set to "On: Display", OPC effect displays on the
screen whib the OPC adjusts the screen brightness.
o When set to "On" or "On: Display", the OPC indicator on
the TV lights green.
This TV provides
various
advanced
functions
for
optimizing
the picture
quality.
Color tone is managed
using the six-color
adjustment
setting.
C.M.S.-Nue:
This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Sataration:
increases or decreases the
saturation of a selected color.
C,M.S.-Value:
A higher vahJe makes the image brighter.
A lower value makes the image darker.
o For resetting all adjustment items to the tsctory preset values,
press A/T
to select "Reset", and then press ENTER.
For a better white balance,
use color temperature
correction.
Nigh:
White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low:
White with reddish tone
White balance
can be adjusted
between
a maximum
of
+30 and a minimum
of-30
for each color temperature.
R Gain (LO/NI):
30 through +30
G Gain (LO/NI): -30 through +30
B Gain (LO/HI):
30 through +30
o For resetting all adjustment items to the tactory preset values,
press A/_'
to select "Reset", and then press ENTER.
Use Fine Motion
Enhanced
to view fast-action
video
more clearly.
On: For obtaining a clearer image.
Off: Normal image.
o "Fine Motion Enhanced" may cause image noise. If this
occurs, turn the tunction "Off".
Automatically
adjusts the irrlage contrast
according
to
the scene.
On: Automatically adjusts the image contrast.
Off: No adjustment.
Adjusts the differences
of picture tones between bright
parts and dark parts. The adjustment
range of the
gamma
can be set to a maximum
of +2 and a minimum
of-2
by pressing
_1 or I1_.
Adjusts on-screen
black level to your preferred level.
Nigh: The black level gets brighter.
Low: The black level gets darker.
o "Black Level" is available tor input signal from Composite
Video, Component 480i and analog broadcasts (air and
cable).
Autornatical_/detects
a film-based
source (originally
encoded
at 24 frames/second),
analyzes
_tthen recreates
each still film frame for high-definition
picture quality.
Advanced(High)/Advanced(Low}:
Select a desired level
to remove jerkiness from film contents.
Standard:
Detects, analyzes, converts film source.
Off: Normal viewing mode.
o "Film Mode" does not function when you set AV MODE to
"GAME".
o "Standard" does not function when channel display shows
an input signal resolution of 480p, 720p or 1080p.
• "Film MODE" is not available during PC format input.
18
Advertisement
