Valve Service And Replacement - Heat & Glo LifeStyle Dakota 42 Owner's Manual

A. Valve Service and Replacement
Figure 12.1 Tools Required
Tools Required
Phillips sc
rewdriver
/8 in., 13/16 in., 15/16 in. wrenches
7/16 in., 5
Figure 12.2 Loosen Refractory Retaining Strip
• The valve can be accessed through the valve access panel
on the right side of the fi replace. Use a phillips screwdriver
to remove the right refractory by removing the two screws
securing the refractory retaining strip.
Retaining
Strip
Figure 12.3 Lift Out Doors
• Remove the refractory side panel and set aside.
Heat-N-Glo Lifestyle Collection • Dakota 42/Dakota 42H • 4036-905 Rev I • 10/05
Figure 12.4 Remove Valve Access Panel
• Remove the inside valve access panel by lifting it up and
out.
Figure 12.56 Remove Exterior Valve Access Panel
• Using a phillips screwdriver remove the exterior valve
access panel.
Figure 12.6 Turn off Gas Valve
• Turn the gas ball valve off and disconnect the gas line after
the ball valve by loosening the fl are nut using a 13/16 in.
and a 15/16 in. wrench.
23